Neo Flow is made of PETG, not glass,
and is also stronger than acrylic.
Unlike colored plastics or stainless materials, it has excellent transparency.
Unlike glass, colored plastic, and stainless steel products, Neo Flow has superior elasticity than acrylic.
Neo Flow is more compact design using the latest manufacturing method than other products.
Unlike stainless and glass products, cleaning is easier because the inlet and outlet parts are separated from the pipe.
Also, unlike stainless steel and glass products, it is easily cut with a small saw as well as pipe scissors. In other words, consumers can optimally adjust the length to fit the size of their tank.
Since the parts of the outlet are rotated 360 degrees, it is free to change the direction of the water flow unlike glass products.
Compared to other products, the radius of curvature is small, so it is installed more closely to the glass.
Neo reliever has a diameter of 40mm and a thickness of 22mm(M) and 26mm(L).
Even when used without a wing, it lowers the flow velocity, but when equipped with a wing it is completely reduced.
You can freely change the direction of the water flow by using only one of the wings or by rotating the product.
The water flow varies depending on the number of wings installed or the degree of insertion.
If only one wing is mounted, the water flow is formed in one direction.
Principle of oil film removal
The oil film that has passed through the Neo Skimmer is crushed very finely and loses its flotation.
Eventually, it enters the inlet of various filters and is biologically decomposed.
The largest product, L size, is only 4 cm wide and 4.5 cm high.
Based on Bernoulli's principle, it uses the correlation between flow velocity and pressure.
Since it is located at the outlet, any creature that enters the skimmer is immediately discharged.
The ability to remove the film can be adjusted by moving the part up and down and rotating the left and right sides.
Aeration is possible when setting high level
60*30*36 tank
* Product specification
M: pipe diameter 13 mm / L: pipe diameter 17 mm
Material: PETG, Acrylic (Neo Holder), Polycarbonate (Neo Holder)
※ Keep out of reach of children and pet
※ Use for Aquarium
※ Unnecessary force can break products
※ Due to the nature of the material, there may be some scratches and may occur newly during use.
※ It is slightly cloudy before contact with water, but it becomes transparent when the water flows.
※ Transparency may decrease over time, depending on water quality.
